Arlo is a famous brand, known for their top-notch security cameras. With the help of an Arlo camera, you can keep an eye on your assets and family from anywhere. To make the most of this device, you must connect it to a stable WiFi connection. It’s highly recommended to connect the camera to the Arlo base station through the firewall only. If you have trouble connecting the Arlo camera to Arlo base station through the firewall, you must fix it.
However, many users have trouble connecting their cameras to the Arlo base station due to their firewall. They have to disable the firewall in order to connect the camera to the base station. But, you don’t have to worry anymore, as there’s a way to connect the camera to the base station through the firewall.
If you want to know the proper procedure to connect your camera to the base station, we’ve got you. We are here with this post to help users with connecting the camera to the base station correctly. This post will walk you through each step to connect the camera to the WiFi without disabling the firewall.
Preparation for Connecting the Arlo Camera to the Arlo Base Station
Before you connect the camera to the base station, there are a few things you need to take care of. Otherwise, you will have trouble connecting the camera to the base station. These are as follows:
- Ensure to connect your Arlo base station to the WiFi, otherwise, it will not function at all.
- Plug the camera and the Arlo base station into a stable power source to connect them properly.
- Make sure the WiFi signal is strong to have a stable connection with the camera and base station.
- You must have access to the router, Arlo base station, and camera settings to configure them accordingly.
These are some preparations you need to do before you proceed with connecting the camera to the base station.
Steps to Connect the Arlo Camera to the Arlo Base Station
We will explain the procedure to connect the camera in parts. You can find the sections mentioned below:
- Setup Port Forward on the Router: You need to log into the router’s web interface to enable port forwarding on your router. From the interface, you need to set up the port and configure the rules.
- Configure Firewall Settings: Hereon, go to the firewall settings, forward ports, and configure the rules accordingly. You need to enter specific ports that will be forwarded to the Arlo base station. The default ports for Arlo are TCP/UDP 123, 443, 514, 4443, 8883, and 80.
- Assign the Arlo Base Station an IP Address: You must assign the Arlo base station an IP address through the settings. All you need to do is access the settings of the computer and assign a permanent IP address.
- Modify Traffic Settings in Firewall: From the firewall settings, you need to allow the traffic between the Arlo camera and the Arlo base station. Afterward, you can try connecting the camera to the Arlo base station.
Final Words
We hope you understand the procedure to connect the camera to the Arlo base station through the firewall. Now, the camera and the Arlo base station should have a proper connection. You can start using the camera accordingly. If you come across any issues with the camera, you must connect with our team straight away.